Using a fish finder to locate fish is not difficult, but it does take some practice and some getting used to. The first thing to do after buying a fish finder is obvious- Read the Manual! The manual may not be exciting or may have more technical information than you are interested in reading, but it cannot be stressed enough how important it is to read the manual in order to familiarize yourself with the unit you purchased.
The next thing to do will be to mount your fish finder. Whether you are using a transom mount, trolling motor mount, hull mount or a portable mount, your manual will be able to walk you through the steps to properly mount your model. If in doubt, consult a professional or have a professional mount it for you.
Now you are ready to turn on your fish finder and get ready to catch more fish. When you first turn the unit on, it will be in automatic mode, meaning that the pre-programmed settings will be in use. As you become more familiar with your model, you will be able to switch to manual mode and customize the settings to the fishing conditions you experience. To begin, leave the fish finder on automatic and take a five minute spin around the lake, bay or ocean that you fish in. Watch the display constantly to get a feel for what you see. Don't worry about catching fish or understanding everything on the display yet. That will come with experience.
Now start adjusting one feature at a time and become familiar with that feature. One of the key settings to play around with is the Sensitivity setting. When you adjust the unit's sensitivity you are adjusting the power of the fish finder. The simple rule of thumb is, the lower the power (sensitivity) the lower the quality of the view on the display. Experts recommend setting the sensitivity to between 75 and 100%. Trial and error will be the best way to determine the optimal setting for your model.
The next setting to visit in manual mode, is the Fish ID setting. Once you have a feel for your unit, turn off the Fish ID feature and try to get used to reading the fish arches that you will see naturally on the screen. The fish icons displayed by the Fish ID are useful for true beginners, but once you begin to familiarize yourself with the display it is better to learn how to read the natural fish arches. The fish arches will give you a more accurate view of what is under water.
Another feature, Auto Depth, is best used at its pre-programmed setting as you begin using your fishfinder. Using the pre-programmed setting will tell the unit to automatically track the bottom and is best used when you are new to using sonar. As you become more of an expert, you can manually set the upper and lower limits of the display window. The smaller the display window you set the better the resolution will be. In general, expert anglers eliminate the top few feet of water and stop the scan about ten feet below the true bottom. The display window size will of course vary depending on how deep the water is and what type of fish you are looking to catch. Experiment with the display window size until you are comfortable with both the amount of water you can view and the picture resolution.
As you are becoming more and more familiar with your fish finder, you will notice a horizontal line across the screen. This line is the Depth Cursor and can be moved up or down on the display. When you find some fish, adjust the depth cursor to cut through the fish arches and the unit will tell you exactly how deep those fish are. Now you know exactly how deep to drop your bait.
One last feature to touch on in this article is the suppressor setting. This setting tells the unit how much "back ground" noise to filter out. Eliminating the back ground noise may be helpful, but if your transducer is mounted properly it is generally unnecessary. If you find you have to use the suppressor to locate fish, then you should check that your transducer is mounted correctly. In general you want to have the suppressor off as having the suppressor setting too high can block the sonar signal entirely and you won't find fish that way!
Using a fish finder can seem pretty daunting at first, but like anything else in life, it just takes practice. Don't be afraid to experiment with your model, try different settings, and see what happens. Trial and error will ultimately help you tune your fish finder to the perfect configuration for your fishing experience. Before you know it you will locate more fish than you know how to catch. Good luck and have fun fishing!
Michael Kors Camo Satchel Best Quality Promotion Alesis Electronic Drum Set Whirlpool Wfw8300sw Grand Sale
